Knuckle joints

Pickford · Post by **Pickford** » Mon Oct 15, 2018 12:39 pm

anyone know if the knuckle joints on the rear subframe are the same as the front ones on a k series?

etrebus · Post by **etrebus** » Mon Oct 15, 2018 5:33 pm

Mine are different the rears are more like a knee joint ,but the fronts are a ball and socket with a nylon cup like the old mini's

etrebus · Post by **etrebus** » Mon Oct 15, 2018 5:37 pm

Mine are different the rears are more like a knee joint ,but the fronts are a ball and socket with a nylon cup like the old mini's

Pickford · Post by **Pickford** » Mon Oct 15, 2018 5:39 pm

Hmm strange I've not had a look at the fronts but they look very similar and my rears have the nylon cup on

DotMatrix · Post by **DotMatrix** » Tue Oct 16, 2018 6:35 am

In the a-series both of Them have a nylon cup.

Pickford · Post by **Pickford** » Tue Oct 16, 2018 7:31 am

Had a research and the fronts are the same as an a series where as the rears are the same type as the mgf problem is they seem to be 50 to 70 pounds each that seems very expensive to me

etrebus · Post by **etrebus** » Wed Oct 17, 2018 9:33 pm

I had a joint wear , but was able to smooth it out with a soft pad and regrease

Knuckle joints

Knuckle joints

Re: Knuckle joints

Re: Knuckle joints

Re: Knuckle joints

Re: Knuckle joints