Mems 1.9
Posted: Sat Jul 16, 2022 4:46 pm
Hello all,
I am putting my metro back together after a spell off the road.
I have a 1.8 non vvc with Mems 1.9 and 5as? The car was converted a fair few years ago using a custom loom and I think Jon boy did the install.
I have popped on a new battery, I have put a new battery on the remote plip thing and I have gone to start the engine but it cranks but does not fire,
I have pressed the unlock button on the remote plip and I can hear a relay in the engine bay but I cannot hear the fuel pump. I don't have any power to fuse 17 hence no power to the pump with the ignition on.
I have replaced the 15 amp fuse on the cable loom and bypassed the inertia switch. But still no fuel pump.
How can I be sure that the immobiliser is off ? I dont have an alarm LED
Any ideas or is there anyone Local to Bath that can help me?
Cheers
Shaun
I am putting my metro back together after a spell off the road.
I have a 1.8 non vvc with Mems 1.9 and 5as? The car was converted a fair few years ago using a custom loom and I think Jon boy did the install.
I have popped on a new battery, I have put a new battery on the remote plip thing and I have gone to start the engine but it cranks but does not fire,
I have pressed the unlock button on the remote plip and I can hear a relay in the engine bay but I cannot hear the fuel pump. I don't have any power to fuse 17 hence no power to the pump with the ignition on.
I have replaced the 15 amp fuse on the cable loom and bypassed the inertia switch. But still no fuel pump.
How can I be sure that the immobiliser is off ? I dont have an alarm LED
Any ideas or is there anyone Local to Bath that can help me?
Cheers
Shaun