Page 1 of 1
Rover 114 gti vvc conversion
Posted: Sun Aug 25, 2019 5:51 pm
by felix
Hi there, im driving a metro mpi gti for a few months now and planning a 160vvc engine conversion, i have the engine, loom and ecu
The immo will be removed,
Before i change the engine i like to know the exact wire modifications because it is my daily
I have the gti wiring diagram and the zr 160 diagram, who can help my
Thanx
Re: Rover 114 gti vvc conversion
Posted: Wed Aug 28, 2019 9:48 am
by etrebus
I would like this too for exactly the same reason
Re: Rover 114 gti vvc conversion
Posted: Sat Sep 14, 2019 4:35 pm
by Madjohn89
After looking on the rave cd I’ve got the loom sorted now if anyone wants any help let me know and I’ll do a wiring diagram for the conversion.
I used a TF160 engine loom and the rover 100 loom spliced together to run Mems 3 but still maintain the metro bulkhead connection. I did get both sides of the loom connection for the TF160 to make a plug and play loom. If you guys are struggling I can put you in touch with some good lads who break mgs for a living and parts readily available Including the complete subframes to swap to shocks.
As it looks like most people on here are just wanting to line there pocket and not willing to offer any help on the subject unless you give them a daft amount of cash.
Re: Rover 114 gti vvc conversion
Posted: Sat Dec 14, 2019 8:53 pm
by felix
Madjohn89 wrote: ↑Sat Sep 14, 2019 4:35 pm
After looking on the rave cd I’ve got the loom sorted now if anyone wants any help let me know and I’ll do a wiring diagram for the conversion.
I used a TF160 engine loom and the rover 100 loom spliced together to run Mems 3 but still maintain the metro bulkhead connection. I did get both sides of the loom connection for the TF160 to make a plug and play loom. If you guys are struggling I can put you in touch with some good lads who break mgs for a living and parts readily available Including the complete subframes to swap to shocks.
As it looks like most people on here are just wanting to line there pocket and not willing to offer any help on the subject unless you give them a daft amount of cash.
I would like the help with the loom please
Re: Rover 114 gti vvc conversion
Posted: Sun Nov 22, 2020 12:17 am
by Marksouthwales
Yup, ill be needing some help as well, got a 114 gta mpi, have a trophy 160 engine, wiring, mems 3 and sa5, waiting to go in. Just need to source all parts, before fitting as daily driver.
Im going to keep the standard gta gearbox for now, what fly wheel, clutch and starter do I need. Not got them, or exhaust manifold.
I have the pg1 gearbox that goes with above engine, but dont have the welding skills to make braket or adaptor linkage
Re: Rover 114 gti vvc conversion
Posted: Sun Apr 17, 2022 10:57 pm
by Cake_Destroyer
Madjohn89 wrote: ↑Sat Sep 14, 2019 4:35 pm
After looking on the rave cd I’ve got the loom sorted now if anyone wants any help let me know and I’ll do a wiring diagram for the conversion.
I used a TF160 engine loom and the rover 100 loom spliced together to run Mems 3 but still maintain the metro bulkhead connection. I did get both sides of the loom connection for the TF160 to make a plug and play loom. If you guys are struggling I can put you in touch with some good lads who break mgs for a living and parts readily available Including the complete subframes to swap to shocks.
As it looks like most people on here are just wanting to line there pocket and not willing to offer any help on the subject unless you give them a daft amount of cash.
Was always the case in the past
I can convert for people, I will dig out old info see if we can get it uploaded to the site.
Next conversion i do, i will make a how-to
Re: Rover 114 gti vvc conversion
Posted: Mon Jan 16, 2023 6:01 am
by Jvivas
Hello, I have a rover 114 gti mpi, now I have bought a rover 200 vi and I want to put the engine on the 114, I need help.
-cabling
-what gearbox to put
-necessary material to adapt one to the other
thank you