Rhonda B18C VTEC Type R
Posted: Thu Mar 16, 2017 1:35 pm
Thought I'd start a little thread on this, most people already know it from when Tony converted it originally, now back on the road with itb's running on an Emerald ecu.
Page 1 of 2
Re: Rhonda B18C VTEC Type R
Posted: Thu Mar 16, 2017 1:40 pm
Bit of a tidy up.
Re: Rhonda B18C VTEC Type R
Posted: Thu Mar 16, 2017 1:42 pm
JDM B18C engine in and running 
Wide steelies on
Wide steelies on
Re: Rhonda B18C VTEC Type R
Posted: Fri Mar 17, 2017 10:09 am
Decided to re shell this as the silver car need 4 floor pans a roof and tailgate and new arches... This is a much more track focused car now.
New car stripped of all sound deadening and old colour on the floors.
Started cutting arches out.
New car stripped of all sound deadening and old colour on the floors.
Started cutting arches out.
Re: Rhonda B18C VTEC Type R
Posted: Fri Mar 17, 2017 10:10 am
Welded the heater hole up in the bulkhead.
Re: Rhonda B18C VTEC Type R
Posted: Fri Mar 17, 2017 10:11 am
Turrets in
Re: Rhonda B18C VTEC Type R
Posted: Fri Mar 17, 2017 10:12 am
Have solid mounted the rear subframe, replaced the rubber blocks with steel and drilled and tapped them, a bolt locates them through the floor.
Re: Rhonda B18C VTEC Type R
Posted: Fri Mar 17, 2017 10:13 am
Spoon 4-2-1 trial fitted
Mounts in the making
Back from powder coaters
Mounts in the making
Back from powder coaters
Re: Rhonda B18C VTEC Type R
Posted: Fri Mar 17, 2017 10:14 am
Paint on
Re: Rhonda B18C VTEC Type R
Posted: Fri Mar 17, 2017 10:16 am
