Logo
Print this page

Clear side repeaters

This guide shows how to change your old faded orange side repeaters with a styled set on your Metro.

Parts required

  • A pair of indicators
  • A pair of orange bulbs

clear side repeater and orange bulb

Fitting steps

  1. Remove the original indicator by pushing the direction of the Austin rover logo. Then pull out when pushed to the side to release. Black arrow indicates direction needed to release.

    remove old side repeater by pushing in direction of the arrow
  2. The bulb holder needs to be removed by twisting the repeater unit and orange bulbs swapped for clear ones.

    fitting orange bulbs to holder  bulb fitted to side repeater unit
  3. Refitment is the same as removal. Take care refitting as the clips on the side are easily snapped.

    clear side repeater fitted to car
Last modified on Thursday, 24 April 2025 22:12
(0 votes)
© Metropower 2017. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Metropower admin.